OpenPoleMount - IV Pole Accessory Box (v1)
Description
OpenPoleMount v1 is an open-source, fully 3D-printable pole-mounted accessory box — the original design in the OpenPoleMount line. It is best used as a storage box that clamps to a standard IV pole to hold small supplies such as wipes, caps, and tubing, mounted below a cradle. (It was the first cradle shape, but its enclosed pocket keeps a seated device's front face from being accessible, so it is now repurposed as an accessory box.) It clamps to the pole with the printed T-handle thumbscrew on the shared OpenPoleMount mounting block, gripping firmly without the pole damage that metal hardware can cause. It prints in PLA, or PETG.
It is general-purpose mounting hardware; it is not a medical device and is not intended to deliver, control, or support medication or therapy.
Version
1.0
Risk class
Class IIa
State of development
Research
Project Type
Keywords
IV pole accessory box, pole-mounted storage, utility box, supply caddy, pole mount, 3D printed, open source hardware, thumbscrew, OpenPoleMount, PLA, PETG
Intended use case
A pole-mounted utility box for holding small personal items and supplies on a standard IV pole. It is built on the OpenPoleMount mounting block and can be resized for other pole diameters. It has no medical function; it is general-purpose mounting hardware, not a medical device.
Licenses
Hardware
CERN-OHL-W-2.0
Software
No software
Documentation
CC-BY-SA-4.0